The posts come in several flavours.

We would print all these in PLA, 2.4mm wall thickness and choose a colour that works on your layout. 

- Double Band for Kicker.  We don't use this now, but this one has two ridges to allow you to sue two thinner bands around the kicker. It is here as an option only.

- Large.   We don't use this now, It is here as an option only.

- PCB Mounting Washer 4mm.stl.  This is not used, it is here if you need it.

- PCB Mounting Washer 8mm.stl. This is used to mount all the PCBs under the deck.  We use a lot of them, print a stack in whatever leftover PLA you have, as these are really handy.

- Posts Top L and R.  These are the tops for the kickers.  You need one each of these

- Square Rope Kicker.  We used 5mm square Neporene Rubber around the kickers.  These posts match this.  You need SIX of these in a nice PLA colour.

- This Short. This is not used, it is here if you need it.

- Thin.  We use these in various locations around the deck.  They have a ridge that allows you to affix rubber band or rope.  We found 4,, fabric covered rubber to use for this.  You need a bunch in a nice PLA colour.

